Description
PU 881 is one-part room temperature curing polyurethane adhesive with good adhesion property. It reacts with moisture in the air to form a kind of elstomer with high strength, aging resistant, vibration exhaustion resistant, low temperature resistant and corrosive resistant properties.

Where to use
Direct glazing and sealing for windshield glazing, glass fiber reinforced plastic fittings, installation in automotive, accessory, auto steel and aluminum board.

Characteristic
Fast tack free, High adhesion strength
Neutral, Good chemical corrosion resistance
Good water proof, Paint able
One part no mixing, excellent weather proof, aging resistant property
Abrasion able, excellent noise, vibration and Impaction resistant
Damp resistant, No sagging
Anti mildew

Packaging
310ml aluminum cartridge, 300ml, 400ml and 600ml sausage. 250kgs bulk by drum;

Storage
At 5~25 centigrade shady, dry place, 12 months of shelf life.

Technical Service
Full support for customer in Technology

Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Primers may be required to achieve optimal adhesion. Smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
PU 881 don't need mixing and use directly.
Spreading
Spread PU 881 on base material with enough pressure and thickness not less than 1 millimeter.

Note
Full cure (dry 7 days under 20C) for PU 881 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang's technician.
Application temperature is between 5 C and 35 C.

Paint Able Property
PU 881 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm.

Anti Fire
PU 881 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor.