PU 521 is one-part room temperature moisture curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant, low temperature resistant and free-corrosive properties.
Where to use
Kater Polyurethane Constrction Sealant is for sealing cracks, building wall,
Cover board, frame joint, window seal (inside & outside), water proof joint (inside & outside), water tank and water drainage structural joint, parapet and road separating joint and general civil project expansion and contraction joint.
Medium curing speed, Good adhesion strength
Repairable, Good chemical corrosion resistance
Good water proof, Paint able
One part no mixing, Excellent weather proof, aging resistant property,
Abrasion able, Excellent noise, vibration and Impaction resistant,
Damp resistant, No sagging
310ml aluminum cartridge, 300ml, 400ml and 600ml sausage. 250kgs bulk by drum;
At 5~25 centigrade shady, dry place, 12 months of shelf life.
Full support for customer in Technology
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Commonly no need for primer. Primer could be recommended in order for best performance. If using primer, smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
PU 521don't need mixing and use directly.
Spread PU 521 on base material with enough pressure and thickness not less than 1 millimeter.
Full cure (dry 7 days under 20C) for PU 521 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang's technician.
Application temperature between 5 C and 35 C.
Paint Able Propery
PU 521 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm.
PU 521 is not easy inflammable.
Health and safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor.