Neutral & solidified; Weathering resistant; Ultraviolet resistant; Ozone resistant; Water resistant; High and low temperature resistant.
Service Restriction: The product is not applicable to structure assembly or project whose base material has a surface temperature above 40degrees Celsius.
1. Various door & window installation and glazing
2. Cementation & seal of aluminum plate, exposed frame and stone
3. Cementation & seal of metal, glass, etc
4. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
5. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Clean the base material with cloth: Clean it with solvent; If in particular demand, coat the surface with paint base and let it dry completely.
Make sure fill the interface with it and tightly stick to the base material.
Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Keep in dry place; Dont unseal it before use; Keep a storage temperature below 25degrees Celsius.
To prolong its service life; A nine-month guarantee
Packing Specification: 280ml, 300ml or 310ml (net capacity) hard package (the actual weight is subject to final products)
Optional Color: Clear
|Density ( g/cm 3 )|
| Curing Rate (2mm/h)|
|Hardness shore A|
|Elongation at Break(%)|
|-20c to +40 c|
|-50 c to +100 c|
|Under water adhesive|
|Elastical Recovery (%)|
| Mass-loss Rate (%)|
|Skin drying time and fully drying time under: 23c and 50% humidity|