| Customization: | Available |
|---|---|
| Bonding Function: | Structural Adhesive |
| Morphology: | Solid-State |
|
Still deciding? Get samples of US$ 2/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Kastar 737 is one component, A high-performance neutral room temperature curing silicone sealant containing anti-fungal compounds, is specially used for sealing in areas of high humidity and damp places to prevent mold growth in areas subject to high humidity levels.
KASTAR 737 Sanitary Sealant in low-maintenance applications in hotel and leisure facilities. Use for water proofing joints between ceramic tiles, baths, and basins, showers, worktops and counters. Bedding in sinks to kitchen tops and vanity units. Sealing between ceramic floor tiles and walls in wet areas. General use in wet and humid areas where fungal resistance is a requirement. Sanitary Sealant offers excellent adhesion to many non-porous surfaces. Will last up to 20 - 25 years provided manufacturers instructions are followed.
1. High performance - high modulus, neutral silicone sealant.
2. Low maintenance.
3. Fungal resistant.
4. For hotel and leisure facilities, and premium domestic installations.
5. Conforms to BS5889 (B) and ISO 846 Part A and B.
6. Prime bare metals, marble, concrete, stone, and timber before sealing. Not for use with aquaria.
* Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
* Make sure to fill the interface with it and tightly stick it to the base material.
* Deal with adhesion test before use and make sure of good compatibility and viscosity of products and base material.
Keep out of reach of children. Once it contacts the skin or eye by accident, rinse the affected part with water for 15 minutes or turn to a doctor for help immediately.
Keep in a dry place; don't unseal it before use; keep a storage temperature below 25ºC to prolong its service life; 12 moths guarantee.
280ml, 300ml, or 310ml (net capacity) hard package (the actual weight is subject to final products)
Transparent and other customized colors.
GB/T14683-2003
| Item | Data |
|---|---|
| Type | Neutral |
| Density(g/cm3) | 0.99 |
| Capacity movement | ±30% |
| Skin formation | 5-10 minutes |
| Drying time(2mm/h) | 6-8 |
| Drying(4mm/h) | 10-13 |
| Max. Tensile strength | 39 |
| Hardness shore | 25±2 |
| Elongation at Break(%) | ≥600 |
| Modulus Mpa(100%) | 0.60 |
| Application temperature | -20ºC to +40ºC |
| Temperature resistance | -50ºC to +100ºC |
| Adhesive | OK |
| Weatherproof | OK |
| Cold-hot adhesive | OK |
| Underwater adhesive | OK |
| Elastic Recovery Ratio (%) | 96 |
| Mass-loss Rate (%) | 8 |
Skin drying time and fully drying time under: 23ºC and 50% humidity humidity humidity humidity.
){kind=link}